Fast and reliable, the RCS 2 is the ideal choice for applications where short trigger times, quick response, and/or low flow are required. The RCS 2 features magnetically coupled metering pumps that eliminate shaft seal leaks.
Ransburg RCS 2 software provides user-friendly programmable alarm tolerances, programmable pot-life timer, multiple flow rates and ratios, and no exotic mixing chambers to maintain or external fluid boosters or balancing pumps required.
RCS 2 technology has an established record for reliability in high performance finishing systems. With no critical seals to worry about leaking or maintaining, you get trouble-free on-ratio performance year after year.
RCS 2 is specifically designed to accommodate color to color changes with no color carryover.
RCS 2 offers a graphical display for optimizing color change, flush, and load sequences. Different sequences and times can be programmed for every color (parameter set).
RCS 2 can be used with rotary atomizers, bells, disks and either electrostatic or non-electrostatic sprayguns. The system can be configured as a stand-alone cart-mounted assembly, as individual control panels for integration into an existing paint shop, or the control racks and boards can be mounted in an engineered control panel.
RCS 2 can be easily integrated into either automatic or manual multi-applicator systems. System can be configured for flow and ratio control for automatic guns or ratio only mode for manual or hand gun applications.
RCS 2 is the latest generation Ratio Control System which establishes a new standard for precise electronically controlled gear-pump metering.
Fast and reliable, the RCS 2 is the ideal choice for applications where short trigger times, quick response, and/or low flow are required. RCS 2 features magnetically coupled metering pumps that eliminate shaft seal leaks.
The RCS 2 provides absolute on-ratio gear-driven mixing and metering control. The system can be used with solvent borne or waterborne materials. This makes for easy integration into automatic or manual systems using single or multiple applicators.
|Size||71H x 25W x 32D|
|Operating Temperature||32 degrees F - 130 degrees F|
|Operating Humidity||0% - 95%|
|Pneumatic Air Consumption||Less than 5cfm|
|Pneumatic Inlet and Outlet Size||3/8 ODT|
|User Interface Processor||1GHz Intel PIII running Windows embedded XP|
|Control Processor||Motorola MC68HC16|
|Fluid Capacity||0.9cc/min - 1500 cc/min per pump|
|Fluid Inlet Size||3/8 ODT|
|Fluid Viscosity Range||20 - 1000 centipose|
|Fluid Input Pressure||3 - 120 psi|
|Fluid Outlet Pressure||200 psi max|
RCS 2 User Manual (Serv. Man LN-9407-00.4)Show literature
RCS-2 RIO Interface Programmers Manual (Serv. Man. LN-9409-03.2)Show literature
Service Manual for RCS 2 Interface (Serv. Man. LN-9405-00.1)Show literature
Service Manual for RCS2 Ribbon Cable Install (Serv. Ins. (SI-09-10)Show literature
Service Manual for RCS Pump Bolt Install. (Serv. Ins. SI-09-06.1)Show literature
Service Manual for RCS 2 Parts, Maintenance, And Troubleshooting (Serv. Man. LN-9408-06.3)Show literature
Service Manual for RCS Positive Displacement PumpShow literature
Service Instruction for Updating Firmware/Software (Serv. Ins. SI-09-04.1)Show literature
Service Instruction for RCS Start Up Requirements (Serv. Ins. SI-08-16.1)Show literature
RANSBURG RCS 2 RATIO CONTROL SYSTEM Install of Shaft SealsShow literature
RANSBURG RCS 2 Catalyst Flow Sensor Alarm Service InstructionsShow literature
For use on the materials below: