The all new RansFlex RFXi 65kV spray gun delivers features and benefits that surpass all other electrostatic applicators. RFXi is a low pressure air atomising electrostatic spray gun powered by an inbuilt turbine generator.
Sprays straight from your regular paint pumps or pressure feed tanks without the need for expensive isolation tables or enclosures.
For superior atomization and finish quality.
The curved gun handle required less “grip-force” with a softer trigger pull which means users experience less joint or muscle strain reducing the risk of RSI and operator fatigue. On/Off voltage switch is on the gun.
Three phases of turbine protection include a divorced turbine air supply cartridge, sealed nozzle/atomisation passages and the strategic turbine location provide a long trouble free working life.
The all new RansFlex RFXi 65kV spray gun delivers features and benefits thatsurpass all other electrostatic applicators. RFXi is a low pressure air atomising electrostatic spray gun powered by an inbuilt turbine generator. Designed with the operator in mind, the handle incorporates many fit and feel improvements with better balanced weight to reduce operator fatigue.
RFXi uses indirect electrostatic charging technology which means there is no longer any need to isolate the waterborne paint feed containers or paint pumps with expensive isolation cages or tanks, saving users significant expense and floor space.
DeVilbiss World renowned air cap atomisation technology is coupled with Ransburg electrostatic power to provide superior atomization, transfer efficiency and performance, all backed by a 5-year limited warranty.
All RansFlex RFXi guns are covered by our extended five year "workmanship and materials" warranty.
Probes built into the air cap horns for ease of
painting in tight areas. Applicator atomisation
components stay cleaner with no probe in the fluid path to get dirty or damaged.
|Applicator Length:||254mm (10-inches)|
|Weight: (Without Hose)||600 grams (21.3 oz.)|
|Hose 79727-XX Lengths (Std):||10m, 15m, 20m, and 30m|
|Operating Voltage:||45kV DC (-) maximum|
|Current Output:||140 microamperes maximum|
|Paint Resistance:*||Waterbased paint only with grounded source|
|Part Sprayability:||Determine sprayability of part to be coated using
Ransburg 76652 Test Equipment
|Fluid Flow Capacity:||1000 ml/minute|
|Wetted Parts:||Stainless, polyethylene, nylon, acetal polymer|
|Operating Pressure (Air Spray)
|(0-6.9 bar) 0-100 psi
Air: (0-6.9 bar) 0-100 psi
|Ambient Temp.:||40°C to 5°C (104°F to 32°F)|
|Air Consumption (With Voltage):||438 SLPM (15.4 SCFM) @ 2.8 bar
(40 psig) @ Handle Inlet
|Sound Level:||92dB (A) @ 2.8 bar (40 psig) Inlet, 1m from applicator|
*Waterbased paints and fluids must be classified as non-flammable spray material.
For use on the materials below:
RansFlex RFXiLP 65kV
|80445-X11100||RansFlex LP RFXi 65kV with air cap, tip, no air or fluid hose|
|80445-X11105||RansFlex LP RFXi 65kV with QD for air, air cap, tip, no air or fluid hose|
|80445-X11101||RansFlex LP RFXi 65kV with air cap, tip, 10m air hose, no fluid hose|
|80445-X11106||RansFlex LP RFXi 65kV with QD for air, air cap, tip, 10m air hose, no fluid hose|
|80445-X11111||RansFlex LP RFXi 65kV with air cap, tip, 10m air and fluid hose|
|80445-X11116||RansFlex LP RFXi 65kV with QD for air, air cap, tip, 10m air and fluid hose|
X = Atomisation - please refer to the service manual for further information
|Nozzle Part Number||For Use With TI-40 Air Cap P/N||Colour||Nozzle Size|
|80239-07||80383-00 LVMP/Trans Tech||Black||0.7 mm|
|80239-10||80383-00 LVMP/Trans Tech||Black||1.8 mm|
|80239-12||80383-00 LVMP/Trans Tech||Red||1.2 mm|
|80239-14||80383-00 LVMP/Trans Tech||Grey||1.4 mm|
|80239-18||80383-00 LVMP/Trans Tech||Green||1.8 mm|