Binks Trophy Automatic Series
START WITH CONFIDENCE. FINISH WITH A TROPHY.
Whatever size job or part you’re finishing – whatever material you’re spraying – Binks Trophy Series spray guns provide the technology and confidence needed for most jobs and coatings. Binks Trophy Series Equipment provides all the utility and versatility you need to develop your production plan and execute it with complete confidence. Each gun can be configured with the appropriate needle and nozzle to accommodate the coating, size of part and type of surface to be finished.


Overview
Binks Trophy Configurations for Application Versatility:
- Spray Technologies - HVLP, LVMP (Compliant), Conventional
- Fluid Nozzles and Needle set-ups - Tuff Tip Hardened Stainless Steel Nozzles, Tungsten Carbide, Plastic Tipped Needles, and Feathering Needles
Engineering Features:
- Air caps are designed to produce uniform spray patterns and excellent transfer efficiency
- Large stainless steel fluid passages for compatibility with industrial coatings
- Long lasting brass inserts and seals
- Hardened stainless steel fluid nozzles
- Large air passages
- Anodized forged aluminum gun body provides durability
Literature

Binks Trophy Series Literature (A54-121)
Sales Literature for Binks Trophy Series (A54-121)
Show literature
Binks Spray Gun Extensions Literature (EA52-100)
Sales Literature for Binks Spray Gun Extensions (EA52-100)
Show literature
Product Manuals

BINKS TROPHY AUTOMATIC SERVICE MANUAL(77-3049)
Service Manual for BINKS “TROPHY” SERIES AUTOMATIC SPRAY GUNS
Show literature
Binks Spray Gun Extensions Service Manual (77-3125)
Service manual for Binks Spray Gun Extensions (77-3125)
Show literature
Materials
For use on the materials below:
- Metal
- Wood
- Plastic
- Ceramic
- Other Substrates
- Primer
- Basecoat
- Clearcoat
Markets
- Automotive OEM & Tier 1&2
- Ceramic
- Domestic Appliances & Electronics
- General Industry
- Wood
Part Numbers
PART NO | DESCRIPTION |
54-6120 |
AIR CAP RING ASSEMBLY |
JGA-156-K10 |
SPRING-CLIP (KIT OF 10) |
54-6102-K3 |
SEPARATOR / BAFFLE (KIT OF 3) |
54-6313 |
SIDE PORT ASSEMBLY |
54-6312 |
PISTON CAP |
54-6311 |
PISTON SPRING |
54-6322 |
PISTON ASSEMBLY |
47-6860 |
NEEDLE, STAINLESS, MARKING: I (STANDARD) |
47-6861 PAGE 7 |
NEEDLE, TUNGSTEN CARBIDE, MARKING: II |
47-6862 |
NEEDLE, PLASTIC, MARKING: III |
54-6320-K3 |
SPRING / PAD NEEDLE ASSEMBLY (KIT OF 3) |
54-6309 |
NEEDLE ADJUSTING KNOB |
54-6319 |
PACKING CARTRIDGE ASSEMBLY |
54-6318-K3 |
NEEDLE PACKING, GREEN (KIT OF 3) |
54-6315-K3 |
PACKING SCREW (KIT OF 3) |
20-1359-1 |
SET SCREW, MOUNTING |
54-308 |
FITTING, AIR CONNECTION, 1/4” NPS |
54-6317-K3 |
PLUG, RECIRCULATING FLUID INLET, 1/4” HEX (KIT OF 3) |
82-469 |
GUN BRUSH |
54-6316 |
RECIRCULATING FITTING, 3/8” NPS (F) |
54-6158 |
REMOTE FAN CONTROL FITTING ASSEMBLY, 3/8” NPS /BSPP(M) |
STAINLESS FLUID NOZZLE ORIFICE SIZE |
FLUID NOZZLE PART NUMBER |
|
.020" |
.50 mm |
45-11050-50 |
.035" |
.85 mm |
45-11050-85 |
.039" |
1.0 mm |
45-11050-10 |
.047" |
1.2 mm |
45-11050-12 |
.055" |
1.4 mm |
45-11050-14 |
.063" |
1.6 mm |
45-11050-16 |
.071" |
1.8 mm |
45-11050-18 |
.079" |
2.0 mm |
45-11060-20 |
.087" |
2.2 mm |
45-11060-22 |
.102" |
2.6 mm |
45-11060-26 |
FEATHERING NEEDLE PART NO. |
MARKING ON THE NEEDLE |
MATCHING NOZZLE P/N (ORIFICE SIZE) |
47-6864 |
I IIII |
45-11050-12 1.2MM (.047") |
47-6865 |
II IIII |
45-11050-14 1.4MM (.055") |
47-6866 |
III IIII |
45-11050-18 1.8MM (.071") |
TC NOZZLE SIZE |
TC NOZZLE P.N. |
TC NEEDLE P.N. |
1.4 MM (.055") |
45-11080-14 |
47-6861 |
1.8 MM (.071") |
45-11080-18 |
47-6861 |
2.2 MM (.086") |
45-11080-22 |
47-6861 |
2.6 MM (.102") |
45-11080-26 |
47-6861 |
CONVENTIONAL AIR CAP AND FLUID NOZZLE SELECTION CHART |
|||||||
Air Cap |
Air Cap Part No. |
Spray Pattern Range |
CFM @ 30 PSI |
CFM @ 50 PSI |
CFM @ 70 PSI |
Fluid Nozzle |
Typical Coatings |
11-C |
46-6500 |
8 – 12" |
9.8 |
14.2 |
18.7 |
45-11050 series, 1.0 mm – 1.8 mm |
Stains, Primers, Lacquers, Enamels, Acrylics, Reduced Latex |
12-C |
46-6501 |
4 – 12" |
8.3 |
12.1 |
14.2 |
45-11050 series, 1.0 mm – 1.8 mm |
Lacquers, Enamels, Top Coats, Low Viscosity Adhesives |
14-C |
46-6503 |
8 – 14" |
17.0 |
24.4 |
31.2 |
45-11060 series, 2.0 mm – 2.6 mm or 45-11080 Tungsten Carbide Series (VT), 1.4 mm – 2.6 mm |
Zinc Rich, Adhesives, Glazes, Engobes, Ceramics, Porcelain Enamels |
LVMP – LOW VOLUME MEDIUM PRESSURE AIR CAP AND FLUID NOZZLE SELECTION CHART |
|||||
Air Cap |
Air Cap Part No. |
Spray Pattern Range |
CFM @30 PSI Gun Inlet (Dynamic) |
Fluid Nozzle |
Typical Coatings |
22-L |
46-6510 |
4 – 12" |
11.2 |
45-11050 series, 0.5 mm – 1.6 mm |
Stains, Primers, Lacquers, Enamels, Acrylics, Reduced Latex |
23-L |
46-6511 |
4 – 12" |
10.6 |
45-11050 series, 1.0 mm – 1.8 mm |
Lacquers, Enamels, Top Coats, Low Viscosity Adhesives |
24-L |
46-6512 |
2 – 6” |
14.3 |
45-11050 series, 0.5 mm – 1.8 mm |
Small Pattern Applications of Stains, Enamels, Lacquers, Acrylics |
25-L |
46-6513 |
4 – 15” |
14.7 |
45-11050 series, 0.85 mm – 1.8 mm |
Dyes, Stains, Toners, Enamels, Lacquers, Primers, Urethanes, Solvent Coatings, Waterborne Coatings |
HVLP – HIGH VOLUME LOW PRESSURE AIR CAP AND FLUID NOZZLE SELECTION CHART |
||||||
Air Cap |
Air Cap Part No. |
Spray Pattern Range |
SCFM @ 10 PSI Cap Pressure (Dynamic) |
Gun Inlet PSI @ 10 PSI at Air Cap (Dynamic) |
Fluid Nozzle |
Typical Coatings |
31-H |
46-6517 |
8 – 12" |
10.5 |
17 |
45-11050 series, .85 mm – 1.8 mm |
Stains, Low Viscous Enamels |
32-H |
46-6518 |
8 – 18" |
15.5 |
24 |
45-11050 series, .85 mm – 1.8 mm |
Lacquers, Enamels, Multi-Colors, Multi-Spec, Nonstick Coatings, Cut-Latex |
33-H |
46-6519 |
8 – 12" |
11.0 |
16 |
45-11050 series, .85 mm – 1.6 mm |
Stains, Lacquers, Enamel, Multi-Color, Multi-Spec, Nonstick Coatings |
39-H |
46-6525 |
4 – 12" |
8.7 |
14 |
45-11050 series, .85 mm – 1.6 mm |
Dyes, Stains, Toners, Enamels, Lacquers, Primers, Urethanes, Solvent Coatings, Waterborne Coatings |