Binks Pressure Regulators
The Flow Pressure and Back Pressure Regulators allow complete control for viscous and heavy materials. They are suitable for solvent based and Water based mastics, sealers and wax’s etc. ‘Wetted’ parts are manufactured from Stainless Steel, PTFE and Tungsten Carbide.
Overview
High Pressure Regulator
The Fluid Regulator will maintain the set downstream pressure at the outlet port providing a controlled flow rate of material to the applicator.
HP Back Pressure Regulator
The Back Pressure Regulator will maintain the required set upstream pressure at the inlet port providing a constant system pressure. Should the system pressure begin to exceed the required pressure the valve will open to relieve sufficient material to maintain the required pressure. Conversely if the upstream pressure begins to reduce, due to material usage, the valve will close
Technical Specifications
Binks Pressure Regulators
Name: High Pressure Regulator
Part Number: 107906
Family: Pump Accessories
Type: High Viscosity High Pressure Fluid Regulator
Inlet/Outlet Port: 3/4" NPT
Regulating Range: 500-3500 PSI
Maximum Inlet Pressure: 5100 PSI
Air Pilot Range: 10-80 PSI
Name: High Pressure Back Pressure Regulator
Part Number: 107908
Family: Pump Accessories
Type: High Viscosity High Pressure Fluid Regulator
Inlet/Outlet Port: 3/4" NPT
Regulating Range: 500-3500 PSI
Maximum Inlet Pressure: 5100 PSI
Air Pilot Range: 10-80 PSI
Literature

Binks high pressure regulator Manual
Service Manual for Binks high pressure regulator
Show literature
Binks hp back pressure regulator Manual
Service Manual for Binks hp back pressure regulator
Show literature
Materials
For use on the materials below:
- Metal
- Wood
- Plastic
- Ceramic
- Other Substrates
- Primer
- Basecoat
- Clearcoat