Binks MACH 1 HVLP
MACH 1 WITH ADJUSTABLE FLUID INLET
The MACH 1 is a full size HVLP spray gun with special nozzles and modifications that allow it to operate high transfer efficiencies in compliance with the California South Coast Air Quality Management (SCAQMD) regulations as a high volume low pressure(HVLP) air spray gun.
Please share:
Overview
Overview
The MACH 1 is a full size HVLP spray gun with special nozzles and modifications that allow it to operate high transfer efficiencies in compliance with the California South Coast Air Quality Management (SCAQMD) regulations as a high volume low pressure(HVLP) air spray gun. Constructed of a lightweight drop-forged aluminum body and stainless steel fluid passages, including long life self-adjusting packings, this spray gun is designed to stand up under hard, continuous use. It operates like a conventional spray system utilizing compressed shop air.
360 View
Technical Specifications
Technical Specifications
Binks MACH 1 HVLP
- Body: . . . . . . . . . . . . . . . . . . . Drop-forged aluminum
- Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20.1 Oz.
- Air Inlet:. . . . . . . . . . . . . . . . . . . . . . . . . . 1/4" NPS (m)
- Fluid Inlet: . . . . . . . . . . . . . . . . . . . . . . . . 3/8" NPS (m)
- Fluid Passages: . . . . . . . . . . . . . . . . . Stainless Steel
- Feed Type: . . . . . . . . . . . . . . Pressure / Siphon Feed
- Part Sheet:. . . . . . . . . . . . . . . . . . . . . . . . . . . . 77-2463
- Gun Repair Kit: . . . . . . . . . . . . . . . . . . . . . . . . 54-3605
Literature
Literature
Product Manuals
Product Manuals
Binks-Mach1HVLP Service Manual (77-2463)
Service Manual for Binks Mach1 HVLP (77-2463)
Show literature
BINKS SELF ADJUSTING PACKING KITS (54-4261 & 54-4262) SERVICE MANUAL
SERVICE MANUAL FOR BINKS SELF ADJUSTING PACKING KITS (54-4261 & 54-4262) (77-2631)
Show literature
Materials
Materials
For use on the materials below:
- Metal
- Wood
- Plastic
- Ceramic
- Other Substrates
- Primer
- Basecoat
- Clearcoat
Markets
Markets
Part Numbers
Part Numbers
| PART NO. | DESCRIPTION |
|---|---|
| 54-3531❑ | RETAINING RING (METAL) |
| 54-3543 | HEAD INSERT |
| 54-3922• | GUN BODY ASSEMBLY |
| 54-3919 | TRIGGER STUD & SCREW KIT |
| 54-3946 | SIDE PORT CONTROL ASSEMBLY |
| 54-3956★ | CONTROL STEM |
| 54-3511★ | RETAINING RING |
| 54-4218★ | CONTROL BODY |
| 20-6160 | O-RING |
| 54-4217★ | CONTROL SCREW |
| 20-4615-5◆❍ | O-RING (PTFE) |
| 54-3515 | SEAL RETAINER |
| 54-3520◆ | SPRING (Yellow) |
| 54-3512◆ | SPINDLE ASSEMBLY |
| 54-3518▼◆ | SPRING (Blue) |
| 54-3541 | HOUSING |
| 54-3925★ | GASKET |
| 54-3928★ | PLUG |
| 54-3606 | FLUID CONTROL KNOB |
| 54-768 | AIR CONNECTION |
| 54-3504 | PLUG |
| 54-3533 | FLUID INLET (Stainless Steel) |
| 54-4264▲■◆ | GLAND ADAPTER |
| 54-4265▲■◆ | NEEDLE SEAL |
| 54-4266▲■◆ | SEAL BACKUP |
| 54-4267▲■◆★ | SPRING |
| 54-4263▲■◆ | PACKING NUT |
| 54-3513 | VALVE SPINDLE CA |
| 54-3547 | TRIGGER |
| 54-4330✩ | ADJUSTABLE FLUID INLET (Optional) |
| 54-4540† | VITREOUS FLUID INLET ASSEMBLY |
| 54-4541†★ | VITREOUS FLUID INLET (Optional) |
| 20-2227-5❍†◆★ | O-RING (Buna) (Optional) |
| 54-4531†◆★ | PACKING SPACER |
| 54-4542†★ | NUT ASSEMBLY (Optional) |
| 54-4370 | SEAL CARTRIDGE ASSEMBLY for Adjustable Fluid Inlet (Not Included) |
| 82-469 | GUN BRUSH |
| OMX-88 | CLEANING BRUSH |
| 54-3918 | WRENCH (Optional, Not Included) |
| 6-429 | GUNNERS MATE |
| Fluid | Fluid Nozzle No. | Applicable Air Nozzle | Fluid Needle |
| ULTRA LIGHT / Reduced Flow | 89 (.020” Dia.) 0.5 mm | SEE NOTE | |
| VERY LIGHT / Reduced Flow |
R90 (.027” Dia.) 0.7 mm 90 (.030” Dia.) 0.8 mm |
90P*** 90P*** |
|
| LIGHT: less than15 to 20 seconds in a Zahn 2 Cup, e.g., stains, varnishes,thin lacquers, automotive refinishing fluids. 9 |
91 (.040” Dia.) 1.0 mm 92 (.046” Dia.) 1.2 mm |
95P, 97P 95P, 97P |
54-3941/ |
| MEDIUM: 20 to 60 seconds in a ZAHN 2 Cup, e.g., general industrial coatings. |
93 (.051” Dia.) 1.3 mm 94 (.055” Dia.) 1.4 mm 95 (.059” Dia.) 1.5 mm 96 (.063” Dia.) 1.6 mm |
95AP, 97AP** 93P*, 94P 100P |
54-3940 |
| HEAVY: greater than 60 seconds in a Zahn 2 Cup | 97 (.070” Dia.) 1.7 mm |
* Select from Air Fluid Nozzle chart, page 6.
** For special purpose nozzles see chart, page 6.
▼ Optional 54-4427 Heavy Duty Spring 1
▲ Part of Self-Adjusting Packing Kit (54-4261) without needle.
■ Part of Self-Adjusting Packing Kit (54-4262) with 54-3941needle.
• Item NOT available separately.
† MACH 1V with vitreous set-up. Optional. Order 54-4540.
❑ Optional 54-4318 Plastic Retaining Ring 1
◆ Also available in spare parts kit 54-3605 (not furnished). Please order kit separately.
❍ Available only as a 5-pack.
★ Available from Industrial Finishing distributors only.
✩Requires 54-4370. Order separately.
